Maintain your Raised Floor
To maximize your investment in your Raised Floor, regular maintenance is a must. All raised floors require preventative maintenance to insure safe operating conditions for equipment and personnel. Listed below are the requirements for proper raised access floor maintenance and care:
Structural Maintenance:
- Have floor inspected yearly by a qualified Raised Floor Technician.
- Rotate panels at least twice a year between high and low traffic areas.
- Adjust floor understucture once a year to correct structural problems and maintain manufactures specifications.
- Replace any missing components as needed, such as edge trim, grounding clips, stringers, and pedestal and stringer gaskets.
- Replace delaminated and warped panels immediately.
Cleaning and Care:
- Dust mop or vacuum floor daily.
- Damp-mop with warm water and mild multipurpose ammoniated floor cleaner. DO NOT use strong solvents, abrasives or scrapers to remove stains.
- Have surface professionally cleaned by professional raised floor maintenance company once a year.
- Vacuum understructure and sub floor at least once a year.
- Clean air flow and perforated panels twice a year.
- DO NOT use wax seal on laminate surface.
- DO NOT Flood with liquid, or use anything other than a damp mop. Large amounts of water can weaken adhesive and cause de-lamination.
- Vacuum carpet panels twice a week with a vacuum equipped with a static dissipating rod.
- Clean carpet panels with dry foam or dry powders at least twice yearly by extraction.
- Install mats or runners in high traffic areas to prevent dirt and debris from entering the access floor environment.
Environment:
- Room Tempatures between 40° and 85° degrees.
- Room Humidity between 40% to 70%.
Resources & Articles
CLIN ® "Resources" page is for individuals/companies seeking information on cleanrooms and controlled environments. Find Cleanroom News, Discussion Forums, Cleanroom Cleaning Recommendations, Cleanroom Terminology, Cleanroom Directory, and more.
Content Disclaimer
Information are contributed by/from different websites and all credit goes to its respective owners/writers/websites/companies and etc, and while we endeavour to keep the information up to date and correct, we make no representations or warranties of any kind, express or implied, about the completeness, accuracy, reliability, suitability or availability with respect to the website or the information, products, services, or related graphics contained on the website for any purpose. Any reliance you place on such information is therefore strictly at your own risk.
In no event will we be liable for any loss or damage including without limitation, indirect or consequential loss or damage, or any loss or damage whatsoever arising from loss of data or profits arising out of, or in connection with, the use of this website.
Through this website you are able to link to other websites which are not under the control of respective owners/writers/websites/companies and etc. We have no control over the nature, content and availability of those sites. The inclusion of any links does not necessarily imply a recommendation or endorse the views expressed within them.
Every effort is made to keep the website up and running smoothly. However, CLIN ® takes no responsibility for, and will not be liable for, the website being temporarily unavailable due to technical issues beyond our control.
